Remington model 11 12 gauge serial numbers serial numbers#

When 12-gauge Model 11/The Sportsman serial numbers hit 499999 on Aug. So, at that time they dropped the seperate serial number series for the 12- and 16-gauge The Sportsman and these later The Sportsman were serial numbered along with the Model 11s. That way they could use the same receivers to build either 'The Sportsman' or the Model 11. At that same time they added the roll-stamped bird on each side to the Model 11 and began stamping Model 11 on the bolt. In 1937 Remington reduced the roll-stamping to a single bird on each side and moved the name 'The Sportsman' to the bolt. 20-gauge serial numbers began at 1000000 and 16-gauge serial numbers at 1500000. began producing the Model 11 in 20- and 16-gauge as well. At the same time The Sportsman was introduced Remington Arms Co., Inc. The early 16-gauge The Sportsman were in the 200000 serial number range, and the 12-gauges were in the 500000 serial number range. When originally introduced 'The Sportsman' had three birds roll-stamped on each side of the receiver, and 'The Sportsman' was part of the roll-stamping on the left side of the receiver. The Sportsman was introduced in 1930 in 20-gauge, and the next year in 12- and 16-gauges. This web page will give you a fairly decent chart of the ranges of constriction for the various choke names.There is no Model number, the gun was called 'The Sportsman.' It was a three-shot sportier version of the Remington Autoloading Gun/Model 11. The difference between these two measurements will give you the picture of the true choke constriction. The way to measure the choke correctly is to measure the inside diameter of the bore 4 inches behind the muzzle, and at the muzzle.

Remington model 11 12 gauge serial numbers full#

The old adage of using a dime to check to see if it is a full choke really won't work that well, there is just too much allowable variance in the dimensions, and you often find that two shotguns of the same make and model with consecutive serial numbers, both stamped with the same fixed choke size on the barrel, will be at different diameters at the muzzle. 740' ID, that 'Full Choke' barrel before it was cut could have measured from as tight as. Since 12 gauge guns have nominal bore sizes that range (by manufacturer and country) from. There is an allowable range for the constriction, and it would be applied to the nominal bore size of the gun. If your barrel is marked 'Full' then it left the factory with a full choke, which is a constriction of between. Remington cease production of the Model 11 in 1948, they did make them during WWII, but pretty much all those went to Uncle Sam. If it were a Model 11 that was made after 1920 and it had left the factory as a riot gun, the model number on the left side would say 'Model 11R', it would have a 4 shot magazine and a 20 inch barrel, and the barrel would be stamped 'Cylinder Bore' on the left side back near the receiver. Louis, MO with the choke size on the same line of stamping, and the words 'Special Steel' on the next line, and then the words 'Guage 2-3/4 in.' or 'Guage 3in.' on the next line. The ones manufactured between 19 will have a engraved portrait of John Browning on the left side of the receiver (The Remington Model 11 is JMB's A5 design licensed to Remington) and the barrel on these, if the original, would be marked ' Browning Arms Company, St. A 12 gauge SUPER MAGNUM with a 3.5-inch ejection. M is a 12 gauge Remington firearm MAGNUM with a 3 ejection. V This represents a 12 gauge shotgun with a 2.75-inch ejection. Remington firearms serial numbers have a two-letter code. To the best of my knowledge, all the Remington Model 11 Riot guns left the factory with 20 inch barrels with cylinder bore chokes, and the barrels were marked 'Cylinder' or 'Cyl.'. Remington Serial Number Lookup: Model 1100.